Banner MINI-BEAM Series Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Banner MINI-BEAM Series. Banner MINI-BEAM Series User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 6
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Self-contained photoelectric sensors
Models
Sensing Mode Range LED Model
OPPOSED
Opposed Emitter
3 m (10 ft)
Infrared 880 nm
SM31E
Opposed Receiver SM31R
Opposed Emitter - Long Range
30 m (100 ft)
SM31EL
Opposed Receiver - Long Range SM31RL
OPPOSED
Opposed Emitter - Clear Plastic Detection
0 to 300 mm (0 to 12 in) Actual range varies,
depending on the light transmission proper-
ties of the plastic material being sensed.
Visible Red 650 nm
SM31EPD
Opposed Receiver - Clear Plastic Detec-
tion
SM31RPD
RETRO
Non-Polarized Retroreflective 5 m (15 ft) SM312LV
P
POLAR RETRO
Polarized Retroreflective 55 mm to 2 m (2 in to 7 ft) SM312LVAG
Extended-Range Polarized Retroreflec-
tive
10 mm to 3 m (0.4 in to 10 ft) SM312LP
DIFFUSE
Diffuse
380 mm (15 in)
Infrared 880 nm
SM312D
300 mm (12 in) SM312DBZ
Divergent Diffuse 130 mm (5 in) SM312W
CONVERGENT
Convergent
16 mm (0.65 in) Focus SM312C
43 mm (1.7 in) Focus SM312C2
CONVERGENT
16 mm (0.65 in) Focus
Visible Red 650 nm
SM312CV
43 mm (1.7 in) Focus SM312CV2
CONVERGENT
16 mm (0.65 in) Focus
Visible Blue 475 nm
SM312CVB
49 mm (1.9 in) Focus SM312CV2B
CONVERGENT
16 mm (0.65 in) Focus
Visible Green 525 nm
SM312CVG
49 mm (1.9 in) Focus SM312CV2G
GLASS FIBER
Glass Fiber Optic
Range varies, depending on sensing mode
and fiber optics used.
Infrared 880 nm SM312F
Visible Red 650 nm SM312FV
Visible Blue 475 nm SM312FVB
Visible Green 525 nm SM312FVG
PLASTIC FIBER
Plastic Fiber Optic
Visible Red 650 nm SM312FP
Visible Blue 475 nm SM312FPB
Visible Green 525 nm SM312FPG
Special High-Power Option Plastic Fiber
Optic
Visible Red 650 nm SM312FPH
Standard 2 m (6.5') cable models are listed.
9 m (30') cable: add suffix “W/30” (e.g., SM31EW/30).
4-pin Euro QD models: add suffix “QD” (e.g., SM31EQD).
150 mm (6") QD Pigtail: add suffix “QDP” (e.g., SM31EQDP).
For a 0.3 ms response: add suffix “MHS” (eg., SM31EMHS).
MINI-BEAM dc-Voltage Series
P/N 69943 rev. C 6/19/2012
Vista de pagina 0
1 2 3 4 5 6

Indice de contenidos

Pagina 1 - P/N 69943 rev. C 6/19/2012

Self-contained photoelectric sensorsModelsSensing Mode Range LED ModelOPPOSEDOpposed Emitter3 m (10 ft)Infrared 880 nmSM31EOpposed Receiver SM31ROppos

Pagina 2 - Dimensions

DimensionsModels with suffix E, EL, EPD, R, RL, RPD, LV, LVAG, LP, D, C, C2, CV, CV2,CVG, CV2G, CVB, and CV2BModels with suffix DBZ and W3.2 mm (0.13”

Pagina 3 - Opposed Mode Alignment

Wiring DiagramsEmitters with Attached Cable All Other Models with Attached Cablebnbu+–10-30V dcbnwhbu+–bkLoadLoad10-30V dcEmitters with Quick Disconne

Pagina 4 - Convergent Mode Alignment

Diffuse Mode AlignmentObjectIf the Alignment LED does not go OFF when the object is removed from the beam,the sensor is probably detecting light refle

Pagina 5 - Retaining Clip

Glass Fiber InstallationO-ringRetaining Clip1. Install the O-ring (supplied with the fiber) on each fiber end, as shown in the drawing.2.While pressi

Pagina 6

SpecificationsSupply Voltage and Current10 to 30V dc (10% maximum ripple) at less than 25 mA (exclusive ofload)Supply Protection CircuitryProtected ag

Comentarios a estos manuales

Sin comentarios