Banner PicoDot PD Series Manual de usuario descargar pdf

Datasheet

• Environmentally sealed housing is only slightly larger than standard PD45

models, with all the functionality. Rated IEC IP67; NEMA 6

• Class 2 laser diode light source

• Convergent beam models have precise, high-energy sensing spot at focus,

available in four focal lengths: 50 mm (2 in), 100 mm (4 in), 200 mm (8 in),

and 300 mm (12 in)

• Retroreflective models have precise, narrow beam; excellent for sensing the

presence of tiny parts at close range, small parts at medium ranges, and for

accurate sensing over long distances

• Fast, 0.2 millisecond sensing response for high-speed sensing or counting

• 10 to 30 V dc operation; choice of NPN or PNP complementary solid state output

• Choose models with 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, or with 150

mm (6 in) Euro-style pigtail quick-disconnect (QD) connector

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Retroreflective-Mode Models

Excellent for applications where high sensing power and small beam size are

important. Operates over sensing ranges typically accomplished only by

conventional opposed-mode photoelectrics; uses a special filter to polarize the

emitted light, filtering out unwanted reflections from shiny objects.

To order 9 m (30 ft) cables, add “W/30” to the model number of any cabled

sensor (e.g., PD49VN6LLP W/30). Models with QD connectors require a mating

cable.

POLAR RETRO

Visible Red; Class 2 laser; 650 nm

Models Range

Cable Output

Type

Excess Gain

PD49VN6LLP

0.2 to 10.6 m (8 in

to 35 ft)

2 m (6.5 ft) cable

NPN

100

1.0 m

3.3 ft

10 m

33 ft

100 m

330 ft

0.1 m

0.33 ft

1000

DISTANCE

Retroreflective PicoDot

with BRT-51X51BM

PD49VN6LLPQ

5-pin QD 150 mm (6 in)

pigtail

PD49VP6LLP 2 m (6.5 ft) cable

PNP

PD49VP6LLPQ

5-pin QD 150 mm (6 in)

pigtail

Tested using a BRT-51x51BM retro target (included with each sensor). Actual range depends on the efficiency and size of the retroreflective target used.

Some targets have produced ranges up to 39.6 m (130 ft).

Performance based on BRT-51X51BM retroreflective target

PD49 Series Ruggedized PicoDot

P/N 67450 Rev. B 20 December 2013

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Datasheet

Datasheet• Environmentally sealed housing is only slightly larger than standard PD45models, with all the functionality. Rated IEC IP67; NEMA 6• Class

Pagina 2 - Convergent-Mode Models

Convergent-Mode ModelsExcels at sensing small parts and profiles and uses fixed-field technology toignore objects beyond the maximum sensing distance.

Pagina 3 - DISTANCE

305 mm (12 inch) FocusModels Cable OutputTypeExcess Gain Beam WidthPD49VN6C300 2 m (6.5 ft) cable NPN11010010 mm0.4 in.100 mm4 in.1000 mm40 in.1 mm0.0

Pagina 4 - Wiring Diagrams

Retroreflective Sensor Beam SizeUnlike conventional retroreflective sensors, theretroreflective laser has the ability to sense relatively smallprofile

Pagina 5 - PD49VP6C50

NPN (Cabled Models) PNP (Cabled Models) Wiring KeyLoadLoad3124510-30V dc150 mAMaximumeach+ Off- OnLaserControl–+((LoadLoad3124510–30 V dc−+150 mAMaxim

Pagina 6

SpecificationsSensing BeamVisible red Class 2 laser, 650 nmSupply Voltage10 to 30 V dc (10% max. ripple) at less than 20 mA,exclusive of loadBeam Size

Pagina 7

5-Pin Threaded M12/Euro-Style Cordsets (Single Ended)Model Length Style Dimensions Pinout (Female)MQDC1-506RA 1.83 m (6 ft)Right-Angle 32 Typ.[1.26&qu

Pagina 8 - EXCESS GAIN

RetroreflectorsBRT-51X51BM• Square, acrylic target• Reflectivity Factor: 1.5• Max. Temperature: +50 °C (+122 °F)• Micro-prism geometry• Optional brack

Comentarios a estos manuales

Sin comentarios

Banner PicoDot PD Series Manual de usuario

Busca en linea o descarga Manual de usuario para Sensores Banner PicoDot PD Series. Banner PicoDot PD Series User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Banner PicoDot PD Series