Banner WORLD-BEAM QS30 Clear Object Sensor Manual de usuario descargar pdf (Pagina 5)

P/N 139760 rev. A 5

Banner Engineering Corp.•Minneapolis,MNU.S.A

www.bannerengineering.com•Tel:763.544.3164

WORLD-BEAM

QS30ELVC Series

SETUP Mode

SETUPmodeisusedtochangesensorconfiguration:

•LightorDarkoperate

•Enableordisableautomaticcompensationalgorithm

If SETUP mode programming is interrupted and remains inactive for 60 seconds, the

sensor returns to RUN mode with the most recent settings (i.e., exits and saves current

selection).

SETUP mode operates in the “background”, while the outputs are active; changes are

updated instantly.

The sensor can be configured using the remote line (see page 7).

Push Button

0.04 seconds ≤ “Click” ≤ 0.8 seconds

Result

Access

SETUP Mode

•Pressandholdbothpushbuttons>2seconds

Green Power LED: OFF

Amber Output LED: Remains active

Bargraph:

Status indicators (LO and AUTO)

flash current setup

Select Setting Combination

•ClickeitherpushbuttonuntilLEDsshowdesiredsettings Sensor rotates through four setting combinations, in the

followingorder:

Return to

RUN Mode

•Pressandholdbothpushbuttons>2seconds

Green Power LED: ON

Amber Output LED: Remains active

Bargraph:

Indicates current setup

•SensorreturnstoRUNmode

with new settings

Setting Combination Auto LED LO LED

Auto Compensation ON/DO* ON OFF

Auto Compensation ON/LO ON ON

Auto Compensation OFF/LO OFF ON

Auto Compensation OFF/DO OFF OFF

* Factory default setting

1 2 3 4 5 6 7 8 9 10 11 12

WORLD-BEAM 1
QS30ELVC Series 1

Comentarios a estos manuales

Sin comentarios

Banner WORLD-BEAM QS30 Clear Object Sensor Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Banner WORLD-BEAM QS30 Clear Object Sensor