Banner D12 Series Manual de usuario descargar pdf

One-button programmable sensors for use with glass or plastic fibers

• Fiber optic sensors for DIN rail mounting; 10 to 30V dc operation

• Visible red (680 nm) light source; models for use with either glass or plastic fibers

• High optical sensing power when needed, also excels at low-contrast sensing

• Easy TEACH-mode programming automatically adjusts sensitivity to optimal setting*

• D12E sensors are designed for low-contrast sensing applications (switching threshold set to just

above the “dark” condition)

• D12E2 sensors set their switching threshold midway between the “dark” and “light” conditions to ig-

nore subtle changes, such as web flutter

• Output may be programmed for either light or dark operate

• Fast 200 microsecond sensing response; programmable 40 millisecond pulse stretcher

• Secure one-button programming is easy to use; one button sets both TEACH and sensor configura-

tion settings

• 7-segment LED bar graph indicates relative received signal strength and sensing contrast, program-

ming status, and diagnostic trouble warnings

• Marginal sensing alarm

• Separate input allows remote programming by an external device, such as a switch or a process con-

troller

* U.S. Patent(s) issued or pending

D12 Expert Series Glass Fiber Optic Models

Models Switching Threshold Setting Output Type Maximum Range

D12EN6FV

Just above the “dark” condition

NPN (sinking)

Range varies by sensing mode and fiber

optics used; see Glass Fiber - Opposed

Mode on page 9.

D12EP6FV PNP (sourcing)

D12E2N6FV

Midway between “dark” and “light”

conditions

NPN (sinking)

D12E2P6FV PNP (sourcing)

D12 Expert Series Plastic Fiber Optic Models

Models Switching Threshold Setting Output Type Maximum Range

D12EN6FP

Just above the “dark” condition

NPN (sinking)

Range varies by sensing mode and fiber

optics used; see Plastic Fiber - Opposed

Mode on page 11.

D12EP6FP PNP (sourcing)

D12E2N6FP

Midway between “dark” and “light”

conditions

NPN (sinking)

D12E2P6FP PNP (sourcing)

Standard 2 m (6.5 ft) cable models are listed. To order the 9 m (30 ft) cable model, add suffix "W/30" to the cabled model number

(D12EN6FV W/30).

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to serious

injury or death. This device does not include the self-checking redundant circuitry necessary to allow its

use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-

energized sensor output condition.

Overview

D12 Expert self-contained sensors offer one-button programming that provides security for your settings, yet is simple to set. D12 Expert

sensors offer two programming modes: TEACH mode and SENSOR OUTPUT CONFIGURATION mode. The D12 Expert also features

D12 Expert Series - TEACH-Mode Fiber Optic Sensors

P/N 041974 Rev. D 5/2/2013

0 041974 9

1 2 3 4 5 6 ... 11 12

Indice de contenidos

Pagina 1 - Overview

One-button programmable sensors for use with glass or plastic fibers• Fiber optic sensors for DIN rail mounting; 10 to 30V dc operation• Visible red (

Pagina 2 - Programming Modes

IT13S Features Sensors Range• Used in pairs, but sold individually; two arerequiredIT23S Features Sensors RangeBundleDiameter5/16 x 24 Thd Brass2 Jam

Pagina 3 - Wiring Diagrams

Plastic Fiber - Opposed ModePIT16U Features Sensors RangeM2.5 x 0.4510.0 mmø 0.25 mmpolyethylene(.39”)(.010”)stainless steel• Fiber diameter: 0.25 mm•

Pagina 4 - Dimensions

PBT26U Features Sensors Range2X ø 0.5 mmpolyethyleneM3 x 0.511.0 mm(.43”) (.02”)nickel plated brass• Fiber diameter: 0.5 mm• Bifurcated fiber• 12 mm b

Pagina 5 - Run Mode

an advanced and comprehensive LED status display, plus sensor self-diagnostics and an alarm output to signal marginal sensing condi-tions.Unlike compe

Pagina 6 - Contrast Indication

SpecificationsSupply Voltage and Current10 to 30V dc at 45 mA max. (exclusive of load); 10%maximum rippleSupply Protection CircuitryProtected against

Pagina 7 - Remote Programming

DimensionsGlass Fiber Optic Models20.2 mm(0.79")35.5 mm(1.40")Fiber-retaining Clip(Supplied with Sensor)7-Segment DisplayOutput IndicatorPow

Pagina 8 - Indicator Single-Flashing

Mounting BracketSection A-AAA2.5 mm(0.10")2.3 mm(0.09")24.5 mm(1.00")4.8 mm(0.19")ø 3.25 mm (2)(0.128")8.6 mm(0.34")11.9

Pagina 9

Output Configuration ProgrammingON7654321ALMLODO40 ms0 msLight/Dark Operate Indicators0 or 40 ms Pulse Stretcher IndicatorsD12 Expert setting indicato

Pagina 10

Contrast, as indicated by the 7-segment displayLEDs Flash 3 Times at End of TEACH Mode Relative Contrast1 (only) Unacceptable1 and 2 Low1, 2, and 3 Mo

Pagina 11

Single-clickDouble-clickTriple-clickWait 0.8 seconds before next inputT1T221T1T1T = 0.04 sec to 0.8 sec T > 0.8 secT2T2T1T1T1T1T1T1HLHLHLSelf-Dia

Pagina 12

LED Behavior ProblemLEDs #1 and 7 flash to-gether 6 timesON7654321ALMLODO40 ms0 msIndicator OFFIndicator ONIndicator Single-Flash 6 TimesThis occurs a